Garage Door Automation

We are the specialist for garage door servicing and repair. We provide door parts, remote replacement, broken torsion springs, spring replacement, broken and frayed cable replacement. At Oz Automation we supply, install, service and repair automatic garage door openers. We repair major door opener brands: Boss, B&D, Centurion, Merlin, ATA and many more. If your garage door opener doesn’t work properly, our highly trained technicians will do a thorough inspection of your motor unit and pinpoint the problem. We provide replacement parts, remote control and complete motor replacement, new garage door replacement and the list goes on.

There are generally 3 types of garage doors: Tilt Door, Panel-Lift or Sectional Door and Roller Doors.

Tilt Doors

This type of doors are single panel garage doors that swing and tilt open by means of arms fixed on its sides. These doors are classical doors that was installed a while back ago and is now been replaced with roller doors or panel/sectional door.

Tilt Door Operator

Steel-line SD800 Tilt Door/Sectional Door Operator

This motor can be used for tilt door as well as panel/sectional door. It is designed for door size of up to 16.5 square metres. The SD800 has been engineered to the highest standard and utilised proven technology coupled with high features as standard to ensure reliable, safe and quiet operating performance year after year. The unit is belt driven and it has powerful DC motor which means reduced noise and vibration on opening and closing. It has soft Start/Stop function to ensure smooth and quiet door operation which is important when the garage is located close to bedrooms or living areas. One of the safety features is the Auto Safety Reverse where if an obstruction occurs during closing of the door this function causes the garage door to immediately stop and reverse direction upon contact with the obstruction. During operation the force required is constantly monitored and adjusted to ensure economical operation and reduced wear and tear. In case of power failure, the manual release can be easily activated to open the garage door.

Panel-Lift Doors or Sectional Doors

This type of doors consist of a few rectangular panels (3 to 6) that slide up and overhead with the track installed on the ceiling. They are available in various styles and colours. The advantage of this type of door is that it does not take extra space outside of your garage to open. This is the main difference from the classical Tilt door where you need an extra space outside to accommodate for the swinging arcs of a tilt door. The panels are joined with hinges and are fixed to the track with rollers to allow the door to slide up and overhead with ease.

Panel-Lift or Sectional Door Operator

Steel-line SD800 Tilt Door/Sectional Door Operator

The SD800 has been engineered to the highest standard and utilised proven technology coupled with high features as standard to ensure reliable, safe and quiet operating performance year after year. It is designed for door size of up to 16.5 square metres. The unit is belt driven and it has powerful DC motor which means reduced noise and vibration on opening and closing. It has soft Start/Stop function to ensure smooth and quiet door operation which is important when the garage is located close to bedrooms or living areas. One of the safety features is the Auto Safety Reverse where if an obstruction occurs during closing of the door this function causes the garage door to immediately stop and reverse direction upon contact with the obstruction. During operation the force required is constantly monitored and adjusted to ensure economical operation and reduced wear and tear. In case of power failure, the manual release can be easily activated to open the garage door.

Roller Doors

This type of door does as its name suggest, rolls up and down to cover the actual garage door opening. The mechanism of the roller door is simple and is very low on maintenance. It requires good tension and smooth guiding tracks in order for it to function properly.

Roller Door Operator

Steel-line RD11 Roller Door Operator

This operator is for door size of up to 16.5 square metres. Despite being compact in size it is packed full of features as well as being super quiet. It has powerful DC motor which means reduced noise and vibration on opening and closing. The unit also has soft Start/Stop function to ensure smooth and quiet door operation which is important when the garage is located close to bedrooms or living areas. The Auto Safety Reverse feature is where if an obstruction occurs during closing of the door this function causes the garage door to immediately stop and reverse direction upon contact with the obstruction. In case of power failure, the manual release can be easily activated to open the garage door.

At Oz Automation, we’ll provide garage door openers that are reliable and have been tested to give you peace of mind that your garage door will operate years after years troubled free. The openers come with full manufacturer’s warranty and also our 12 months craftsmanship warranty.

We are affiliated with STEEL-LINE and CENTURION Garage Doors, both are reputable and well-known Australian company that have been in the industry for over 18 years. The benefits of working with experienced manufacturers are the products and supports they provide that are mutually beneficial for us and for you, our clients. You will have trouble free operation and we don’t get call backs which can be very costly to us.

It is highly recommended that you get your garage doors service once every 12 months to keep it operating the way it should be and prevent it from avoidable wear and tear break down. A quick way of checking to see whether your garage door needs a service is to put it on manual and open and close the door with your hand. The door should be fairly easy to pull up or down.

Please contact our technician to book for your next garage door service for longer lasting garage doors.